Wireless Network

[MARX ®]

Originally Posted by Dr.Scoo

and what is ur router?

Its name is SMC, its for both wired and wireless connections together

Originally Posted by icemaker

read the manual

Man, l manual i got with the router bikaffer, ma btefham minno shi

[MORPHEUSP]

Follow these simple steps please: ( if your isp uses DHCP mode

1-and the basic settings panel( commonly it;s the first page in most routers) under the title internet ip address : choose: Get Dynamically From ISP. and do the same for the DNS address.
2- name go to Advanced wireless settings and make sure that both (Enable Wireless Router Radio and Enable SSID Broadcast are checked)
3-go to the lan ip setup set the ip address 192.168.1.1 and the subnet mask 255.255.255.0, as for RIP Direction : None, RIP Version : Disabled.
4-also in the same panel (Lan ip setup) CHECK the bax near: Use Router as DHCP Server
5-save changes on the router then exit
6-delete your internet connections on both of your pcs
7-create new (local are connections) and set them up to automaticly get ip from server settings
8- when you are done plz restart both of your pcs
9-when done try to ping on 192.168.1.1
Note: please provide me with additional details about your internet connection specially about the following
1-Do you need to enable proxy to surf?
2-Do you have a static ip?
3-Try to post a picture for your routers control panel


If my steps didnt work for you plz do as i asked in the note so we can easily solve your problem

[MARX ®]

Thanks alot man, ba3ed ma jarrabta, bas thanks for the help..

bas i have some questions, what is static ip?Whats the DHCP mode?

[Dr.Scoo]

you enable the DHCP server in z router.
so when u connect a pc to this router (whether by a cable or wireless), the router will assign an IP, subnet mask and gateway and a dns if necessary to the PC.