Monitor Resolution Issue

Adam · 04-03-2009

I have a BenQ 22" LCD E2200HD that is connected to my Radeon HD 4850 512MB through a DVI-HDMI adapter. All resolutions are fine except for 1776x1000 & 1920x1080, when I go up to these resolutions the picture becomes small and I get black around it, I didn't have this problem when the monitor was connected to the PC through DVI-DVI, nor was the a problem when it was connected to the PS3 through HDMI-HDMI.

1680x1050:

1920x1080:

I've tried a differant DVI-HDMI adapter, but there was no luck.
How can I solve this problem?

chaingang_100 · 04-03-2009

Man try changing the resolution from ATI's software which is ATI catalyst i think, if it also didn't work then there's no solution except connecting it but using DVI-DVI connection

**Kingroudy** · 04-03-2009

1776x1000 is a non standard resolution that i don't recommend you to use it.
change the frequency of the display (lower it) when you raise the resolution to full HD.

SysTaMatIcS · 04-03-2009

iv read somewhere that the dvi thing is not good , you should only use it for games aw hek shi

Adam · 04-03-2009

Fixed

I went into Catalyst and saw that the underscan was high so all I had to do is return it to 0%.

Thanks for the help

04-03-2009	#1
Adam Registered Member Last Online: 06-03-2013 Join Date: Feb 2008 Posts: 1,410 Thanks: 1,444 Thanked 1,235 Times in 689 Posts Groans: 25 Groaned at 21 Times in 19 Posts	Monitor Resolution Issue I have a BenQ 22" LCD E2200HD that is connected to my Radeon HD 4850 512MB through a DVI-HDMI adapter. All resolutions are fine except for 1776x1000 & 1920x1080, when I go up to these resolutions the picture becomes small and I get black around it, I didn't have this problem when the monitor was connected to the PC through DVI-DVI, nor was the a problem when it was connected to the PS3 through HDMI-HDMI. 1680x1050: 1920x1080: I've tried a differant DVI-HDMI adapter, but there was no luck. How can I solve this problem?

04-03-2009	#3
Kingroudy Super Moderator Last Online: 02-16-2022 Join Date: May 2006 Posts: 5,580 Thanks: 1,888 Thanked 2,653 Times in 1,593 Posts Groans: 55 Groaned at 35 Times in 32 Posts	1776x1000 is a non standard resolution that i don't recommend you to use it. change the frequency of the display (lower it) when you raise the resolution to full HD. __________________ click on 'Groan' to switch to my left testicle.

04-03-2009	#4
SysTaMatIcS Registered Member Last Online: 10-14-2022 Join Date: Dec 2006 Posts: 10,467 Thanks: 14,136 Thanked 4,244 Times in 2,547 Posts Groans: 186 Groaned at 198 Times in 120 Posts	iv read somewhere that the dvi thing is not good , you should only use it for games aw hek shi __________________ problems of performance appraisal is that it sucks to memorize them

04-03-2009	#2
chaingang_100 Registered Member Last Online: 10-23-2012 Join Date: May 2007 Posts: 733 Thanks: 521 Thanked 394 Times in 240 Posts Groans: 0 Groaned at 0 Times in 0 Posts	Man try changing the resolution from ATI's software which is ATI catalyst i think, if it also didn't work then there's no solution except connecting it but using DVI-DVI connection

04-03-2009	#5
Adam Registered Member Last Online: 06-03-2013 Join Date: Feb 2008 Posts: 1,410 Thanks: 1,444 Thanked 1,235 Times in 689 Posts Groans: 25 Groaned at 21 Times in 19 Posts	Fixed I went into Catalyst and saw that the underscan was high so all I had to do is return it to 0%. Thanks for the help

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)